Latest ethernet cable connector ethercat factory for engineering

Latest products

M12 Circular Connector to USB2.0 Connector Molded with Cable

M8 Circular Connector to USB2.0 Connector Molded with Cable

Ethernet Patch Cables, double ended RJ45 8P8C male plug with locking screw on one end

Ethernet Patch Cables, double ended RJ45 8P8C male plug

Product Information
Feedback

The series of FieldBus cable connectors are desinged to support the industrial protocols including Devicenet, CAN-BUS, Profibus, Profinet, EtherCAT cable ...

Latest ethernet cable connector ethercat factory for engineering-1

General Information

Connector Serries	FieldBus
Gender	Male to Female
Locking type	Fix screw
Mounting type	Straight
Connector	M12 Male, M12 Female
Ambient temperature	-25℃ ~ +80℃
Connector overmold	TPE
Connector insert	PA
Connector contacts	Brass with gold plated
Coupling nut/screw	Brass with nickel plated
Insulation resistance	≥100 MΩ
Contact resistance	≤ 5 mΩ
EMI Shielding	Shielded
IP rating	IP 67 in locked condition
Locking Design	Anti-Vibration
Seal / O - ring	FKM

Electrical data & Mechanical data

Contacts	X Coding	Rated current	Voltage	Wire gauge/size			Cable jacket	Wire insulation	Cable Spec	Wiring list	Cable ending & length
Contacts	X Coding	Rated current	A/C	D/C	AWG	mm²	Cable jacket	Wire insulation	Cable Spec	Wiring list	Cable ending & length
08 pins		0.5A	80V	700V	26AWG	7 x 0.16	Thermoplastic copolymer (FRNC)	HDPE	CAT 6A	1. OR/WH orange/white 2. OR orange 3. GN/WH green/white 4. GN green 5. BU/WH blue/white 6. BU blue 7. BN/WH brown/white 8. BN brown	Customized cable ending and length
08 pins		0.5A	80V	700V	26AWG	7 x 0.16	Thermoplastic copolymer (FRNC)	HDPE	CAT 6A	1. OR/WH orange/white 2. OR orange 3. GN/WH green/white 4. GN green 5. BU/WH blue/white 6. BU blue 7. BN/WH brown/white 8. BN brown	Customized cable ending and length

Level and performance

n******w

The design of APTEK ethernet cable connector involves the following steps: preparation of initial idea and/or sketch, CAD (Computer Aided Design) software programming, and 3D wax prototype.

b******e

APTEK ethernet cable assembly has to undergo the following production procedures combining traditional techniques: cutting and forming, wax carving, soldering, welding, crafting, setting, polishing, and assembling.

l******w

APTEK ethernet cable connector has undergone a range of comprehensive tests. It has been tested for tension, flammability, corrosion, wear & tear, and longevity.

u******s

The design procedures of APTEK ethernet cable assembly are professional, including CAD shadow band, creation of prototypes, creation of castable models, and 3D wax prototype.

j******b

In the manufacture of APTEK ethernet cable connector, a range of techniques are used, from the ultra-traditional cutting of metal using a saw, through soldering, into lost-wax casting.

u******b

The product has good environmental adaptability. It is not easily affected by vibration, shock, bump, extrusion, dropping, and temperature.

Product Message

*Name

Phone

*E-mail

*Content