Custom m12 circular connector emishielded factory for engineering

Latest products

M12 Circular Connector to USB2.0 Connector Molded with Cable

M8 Circular Connector to USB2.0 Connector Molded with Cable

Ethernet Patch Cables, double ended RJ45 8P8C male plug with locking screw on one end

Ethernet Patch Cables, double ended RJ45 8P8C male plug

Product Information
Feedback

M12 sensor/actuator connectors with M12 locking thread for industrial automation, process control and commercial electronics, it is the most commonly used connector in the factory automation. M12 connectors offer various cable connectors, panel mounting receptacles and installable accessories.

APTEK emishielded m12 circular connector factory for engineering-1

APTEK emishielded m12 circular connector factory for engineering-2

General Information

Connector Serries	M12
Gender	Male
Locking type	Fix screw
Mounting type	Straight / Right angled
Standard	IEC 61076-2-109
Ambient temperature	-20℃ ~ +80℃
Connector overmold	TPE/ TPU
Connector insert	PA
Connector contacts	Brass with gold plated
Coupling nut/screw	Brass with nickel plated
Insulation resistance	≥100 MΩ
Contact resistance	≤ 5 mΩ
EMI Shielding	Shielded
IP rating:	IP 67 in locked condition
Locking Design:	Anti-Vibration
Transmission characteristic:	CAT 6A

Electrical data & Mechanical data

Contacts

Coding

Rated current

Voltage

Wire gauge/size

Cable jacket

Wire insulation

Cable Sepc

Wiring list

Cable ending & length

A/C

D/C

AWG

mm²

08 pins

APTEK emishielded m12 circular connector factory for engineering-3

X-Coding

0.5A

48V

60V

24~27AWG

0.14~0.25

PUR / PVC

HDPE

CAT 6A

1.WH/OR white/orange
2.OR orange
3.WH/GN white/green
4.GN green
5.WH/BN white/brown
6.BN brown
7.WH/BU white/blue
8.BU blue

Customized cable ending and length

Level and performance

q******g

APTEK m12 din connector is manufactured with environmental consciousnesses in mind. During the planning of the sauna, the most efficient way to use the wood resource is found. [卖点、特色

z******t

APTEK m12 circular connector is manufactured by adopting RTM-technology which is the preferred technique for manufacturing components that are exposed to heavy structural stresses.

x******i

APTEK m12 circular connector is checked by conducting on-site testing including marking and vulcanization tests for rubber outsoles, rocking tests, fabric testing and verification of special features like waterproofing and stain resistance.

j******t

Different water purification technique has adopted by APTEK m12 circular connector, such as physical and chemical filtration. These two purification techniques can greatly enhance the purifying effect.

d******i

APTEK m12 circular connector is professionally designed. It is carried out by adopting the principle of 'the conventional separation processes for the removal of bulk contaminants'.

b******s

The implementation of the quality management system ensures that products conform to international standards.

Product Message

*Name

Phone

*E-mail

*Content