Top m12 male connector shielded supply for industry

Latest products

M12 Circular Connector to USB2.0 Connector Molded with Cable

M8 Circular Connector to USB2.0 Connector Molded with Cable

Ethernet Patch Cables, double ended RJ45 8P8C male plug with locking screw on one end

Ethernet Patch Cables, double ended RJ45 8P8C male plug

Product Information
Feedback

M12 sensor/actuator connectors with M12 locking thread for industrial automation, process control and commercial electronics, it is the most commonly used connector in the factory automation. M12 connectors offer various cable connectors, panel mounting receptacles and installable accessories.

APTEK shielded m12 male connector supply for industry-1

APTEK shielded m12 male connector supply for industry-2

General Information

Connector Serries	M12
Gender	Female
Locking type	Fix screw
Mounting type	Straight / Right angled
Mounting thread	PG7 or PG9
Standard:	IEC 61076-2-104
Ambient temperature:	-25℃ ~ +80℃
Connector overmold:	PA + GF
Connector insert:	PA + GF
Connector contacts:	Brass with gold plated
Coupling nut/screw:	Brass with nickel plated
Insulation resistance:	≥100 MΩ
Contact resistance:	≤ 5 mΩ
EMI Shielding:	Non-Shielded
IP rating:	IP 67 in locked condition
Locking Design:	Anti-Vibration
Seal / O - ring:	FKM
Suitable cable Dia:	3.5 ~ 5.0mm

Electrical data & Mechanical data

Contacts	Available Coding			Rated current	Voltage		Wire gauge/size		Wire insulation	Cable ending & length
Contacts	A	B	D	Rated current	A/C	D/C	AWG	mm²	Wire insulation	Cable ending & length
03 pins				4A	250V	250V	18 ~24AWG	0.75~0.25	PVC	Customized cable ending and length
04 pins					250V	250V	18 ~24AWG	0.75~0.25	PVC
05 pins				4A	60V	60V	18 ~24AWG	0.75~0.25	PVC
08 pins				2A	30V	30V	18 ~24AWG	0.75~0.25	PVC

Level and performance

b******q

APTEK m12 din connector complies with the essential international electrical safety requirements. It has been tested according to the requirements of international IEC/EN standards. Founded in 2009, APTEK is a professional manufacturer of industrial waterproof connectors

w******z

APTEK m12 din connector is manufactured complying to the regulations for bathroom products. From sizing formula preparation, moulding by grouting, rough shaping, drying, glaze spraying, to the firing stage, it is done in line with specific requirements. A total of 11 steps are built for custom service at APTEK such as technical feasibility analysis

g******s

The production stages of APTEK m12 male connector involve a few aspects. It has to undergo die casting, finish machining, CNC machining, surface treating, and electrostatic spraying. APTEK manufactures connectors up to the IEC international standard

y******h

Every APTEK m12 male connector has undergone and passed stringent quality control tests. These quality control tests start with the knitting of the base fabric, followed by the inspection of every other element before the product is passed and cleared for delivery. APTEK is a focus on industrial connectors for nearly 10 years

m******c

The design of APTEK m12 din connector takes into account many factors. It includes statics, dynamics, the strength of materials, vibrations, reliability, and fatigue. APTEK manufactures connectors up to the IEC international standard

u******f

The product is highly recommended by its high quality and versatility. A total of 11 steps are built for custom service at APTEK such as technical feasibility analysis

Product Message

*Name

Phone

*E-mail

*Content

APTEK shielded m12 male connector supply for industry