High-quality m12 panel mount connectors connectors company for engineering

M12 sensor/actuator connectors with M12 locking thread for industrial automation, process control and commercial electronics, it is the most commonly used connector in the factory automation. M12 connectors offer various cable connectors, panel mounting receptacles and installable accessories.

High-quality m12 panel mount connectors connectors company for engineering-1

Dimensions

High-quality m12 panel mount connectors connectors company for engineering-2

General Information

Connector Serries	M12
Gender	Male
Locking type	Fix screw
Mounting type	Straight
Mounting thread	PG7 or PG9
Standard:	IEC 61076-2-101
Ambient temperature:	-25℃ ~ +80℃
Connector body:	Zinc alloy with nickel plated
Connector insert:	PA + GF
Connector contacts:	Brass with gold plated
Coupling nut/screw:	Brass with nickel plated
Insulation resistance:	≥100 MΩ
Contact resistance:	≤ 5 mΩ
EMI Shielding:	Shielded
Suitable cable Dia:	6.0 ~ 8.0mm
IP rating:	IP 67 in locked condition
Locking Design:	Anti-Vibration

Electrical data & Mechanical data

Contacts	Available Coding			Rated current	Voltage		Wire gauge/size		Wire insulation	Cable ending & length
Contacts	A	B	D	Rated current	A/C	D/C	AWG	mm²	Wire insulation	Cable ending & length
03 pins				4A	250V	250V	18 ~26AWG	0.75~0.14	PVC	Customized cable ending and length
04 pins				4A	250V	250V	18 ~26AWG	0.75~0.14	PVC
05 pins				4A	60V	60V	18 ~26AWG	0.75~0.14	PVC
08 pins				2A	30V	30V	18 ~26AWG	0.75~0.14	PVC

Level and performance

z******m

The production of APTEK m12 din connector covers a wide range of stages, ranging from materials preparation, formula creation, materials mixing, calcination, moulding, glazing, etc.

g******d

APTEK m12 din connector is created by our professional designers who keep up with customers' requirements relating to their foot shapes and unique arch shapes.

m******j

Before production, the electrode materials of APTEK m12 din connector are carefully handled to prevent them from coming into contact with each other. Because contamination between the anode and cathode materials will ruin the battery.

v******a

APTEK m12 din connector will be tested on its water treating performance in terms of capacity on removing suspended solids and microbial pathogens, as well as the water quality and contamination levels.

s******d

The R&D of APTEK m12 din connector is carried out by experienced developers who focus on providing online POS solutions based on cloud technology.

q******k

This product has electromagnetic compatibility. EMC testings are performed in it manufacturing to a wide range of EMC standards such as EMC Directive 2014/30/EU.

Product Message

*Name

Phone

*E-mail

*Content