High-quality m8 sensor connectors waterproof manufacturers for industry

Latest products

M12 Circular Connector to USB2.0 Connector Molded with Cable

M8 Circular Connector to USB2.0 Connector Molded with Cable

Ethernet Patch Cables, double ended RJ45 8P8C male plug with locking screw on one end

Ethernet Patch Cables, double ended RJ45 8P8C male plug

Product Information
Feedback

The series of M8 circular connector provides a wide range of metric M8 connectors for small sensors and actuators. The connector of 8mm metric size with thread locking mechanism, is one of the most commonly used connectors in factory automation, ideally suited for industrial control networks where small sendos are required.

APTEK waterproof m8 sensor connectors manufacturers for industry-1

APTEK waterproof m8 sensor connectors manufacturers for industry-2

General Information

Connector Serries	M8
Gender	Male
Locking type	Fix screw
Mounting type	Straight / Right angled
Standard	IEC 61076-2-104
Ambient temperature	-20℃ ~ +80℃
Connector overmold	TPE/ TPU
Connector insert	PA
Connector contacts	Brass with gold plated
Coupling nut/screw	Brass with nickel plated
Insulation resistance	≥100 MΩ
Contact resistance	≤ 5 mΩ
EMI Shielding	Non-Shielded
IP rating	IP 67 in locked condition
Locking Design	Anti-Vibration

Electrical data & Mechanical data

Contacts	Coding	Rated current	Voltage		Wire gauge/size		Cable jacket	Wire insulation	Wiring list	Cable ending & length
Contacts	Coding	Rated current	A/C	D/C	AWG	mm²	Cable jacket	Wire insulation	Wiring list	Cable ending & length
03 pins	A-Coding	3A	60V	60V	24AWG	0.25	PUR / PVC	PVC	1.BN brown 3.BU blue 4.BK black	Customized cable ending and length
04 pins	A-Coding	3A	30V	30V	24AWG	0.25	PUR / PVC	PVC	1.BN brown 2.WH white 3.BU blue 4.BK black
05 pins	B-Coding	3A	30V	30V	24AWG	0.25	PUR / PVC	PVC	1.BN brown 2.WH white 3.BU blue 4.BK black 5.GY grey
06 pins	A-Coding	1A	30V	30V	26AWG	0.14	PUR / PVC	PVC	1.BN brown 2.WH white 3.BU blue 4.BK black 5.GY grey 6.PK pink
08 pins	A-Coding	1A	30V	30V	26AWG	0.14	PUR / PVC	PVC	1.WH white 2.BN brown 3.GN green 4.YL yellow 5.GY grey 6.PK pink 7.BU blue 8.RD red

Level and performance

w******d

Lots of factors are taken into consideration in APTEK m8 bulkhead connector design. They are required motion, required space, speed of operation, required labor, etc.

a******h

The quality standard of APTEK m8 sensor connectors is high. It is processed by advanced light processing equipment and tested under severe quality tests.

r******i

The production processes of APTEK m8 sensor connectors are strictly done according to the mechanical equipment industry, including the surface spraying, electroplating, and components assembly.

k******k

The fabrics for APTEK m8 bulkhead connector is carefully selected. Only those with high strength, good tearing strength, elasticity, and resistance to chemical liquids are chosen.

j******b

During the development stage of APTEK m8 sensor connectors, different factors have been taken into consideration. They are mainly structure stability, statics, mechanical properties, the whole efficiency, etc.

a******g

The product is examined under the supervision of our skilled quality experts against various parameters.

Product Message

*Name

Phone

*E-mail

*Content

APTEK waterproof m8 sensor connectors manufacturers for industry