New m8 panel mount connector emishielded factory for packaging machine

Latest products

M12 Circular Connector to USB2.0 Connector Molded with Cable

M8 Circular Connector to USB2.0 Connector Molded with Cable

Ethernet Patch Cables, double ended RJ45 8P8C male plug with locking screw on one end

Ethernet Patch Cables, double ended RJ45 8P8C male plug

Product Information
Feedback

The series of M8 circular connector provides a wide range of metric M8 connectors for small sensors and actuators. The connector of 8mm metric size with thread locking mechanism, is one of the most commonly used connectors in factory automation, ideally suited for industrial control networks where small sendos are required.

New m8 panel mount connector emishielded factory for packaging machine-1

New m8 panel mount connector emishielded factory for packaging machine-2

General Information

Connector Serries	M8
Gender	Male
Locking type	Fix screw
Mounting type	Straight
Standard	IEC 61076-2-104
Ambient temperature	-25℃ ~ +80℃
Connector insert	PA
Connector contacts	Brass with gold plated
Coupling nut/screw	Brass with nickel plated
Insulation resistance	≥100 MΩ
Contact resistance	≤ 5 mΩ
EMI Shielding	Non-Shielded
IP rating	IP 67 in locked condition
Locking Design	Anti-Vibration

Electrical data & Mechanical data

Contacts	Coding	Wire termination	Rated current	Voltage		Wire gauge/size		Wire insulation	Cable ending & length
Contacts	Coding	Wire termination	Rated current	A/C	D/C	AWG	mm²	Wire insulation	Cable ending & length
03 pins	A-Coding	PCB Version	3A	60V	60V	24AWG	0.25	PVC	Customized cable ending and length
04 pins	A-Coding	PCB Version	3A	30V	30V	24AWG	0.25	PVC
05 pins	B-Coding	Solder Version	3A	30V	30V	24AWG	0.25	PVC
06 pins	A-Coding	Solder Version	1A	30V	30V	26AWG	0.14	PVC
08 pins	A-Coding	Solder Version	1A	30V	30V	26AWG	0.14	PVC

Level and performance

n******e

APTEK m8 male connector is strictly inspected. It is carried out by our QC team who checks its biocompatibility, sanitation, wear resistance, and chemical resistance.

t******r

The quality of APTEK m8 male connector is guaranteed. It is manufactured in a highly regulated environment where quality systems like FMEA are key to medical device manufacturing.

k******z

Typical parameters of APTEK m8 male connector being measured include flexure, tension, compression, peel strength, adhesive/bond strength, puncture, insertion/extraction and sliding of pistons.

w******z

The production of APTEK m8 panel mount connector involves the following concepts: medical device regulations, design controls, medical device testing, risk management, quality assurance.

b******o

The manufacture of APTEK m8 panel mount connector involves the following stages: medical material and processes specification, vendor selection, detailed part design, software fine-tuning and testing, failure mode analysis, and tolerance analysis.

h******w

Zhongshan Aptek Electronics Technology Co.,Ltd Through scientific planning and reasonable management and control of raw material purchase costs, transportation costs, human resource costs, etc., the m8 panel mount connector produced m8 panel mount connector are more cost-effective under the premise of no change in performance, quality, and quality.

Product Message

*Name

Phone

*E-mail

*Content