Top m8 waterproof connector molded suppliers for industry

Latest products

M12 Circular Connector to USB2.0 Connector Molded with Cable

M8 Circular Connector to USB2.0 Connector Molded with Cable

Ethernet Patch Cables, double ended RJ45 8P8C male plug with locking screw on one end

Ethernet Patch Cables, double ended RJ45 8P8C male plug

Product Information
Feedback

The series of M8 circular connector provides a wide range of metric M8 connectors for small sensors and actuators. The connector of 8mm metric size with thread locking mechanism, is one of the most commonly used connectors in factory automation, ideally suited for industrial control networks where small sendos are required.

APTEK Top m8 waterproof connector suppliers for industry-1

APTEK Top m8 waterproof connector suppliers for industry-2

General Information

Connector Serries	M8
Gender	Female
Locking type	Fix screw
Mounting type	Straight
Standard	IEC 61076-2-104
Ambient temperature	-25℃ ~ +80℃
Connector insert	PA
Connector contacts	Brass with gold plated
Coupling nut/screw	Brass with nickel plated
Insulation resistance	≥100 MΩ
Contact resistance	≤ 5 mΩ
EMI Shielding	Non-Shielded
IP rating	IP 67 in locked condition
Locking Design	Anti-Vibration

Electrical data & Mechanical data

Contacts	Coding	Wire termination	Rated current	Voltage		Wire gauge/size		Wire insulation	Cable ending & length
Contacts	Coding	Wire termination	Rated current	A/C	D/C	AWG	mm²	Wire insulation	Cable ending & length
03 pins	A-Coding	PCB Version	3A	60V	60V	24AWG	0.25	PVC	Customized cable ending and length
04 pins	A-Coding	PCB Version	3A	30V	30V	24AWG	0.25	PVC
05 pins	B-Coding	PCB Version	3A	30V	30V	24AWG	0.25	PVC
06 pins	A-Coding	PCB Version	1A	30V	30V	26AWG	0.14	PVC
08 pins	A-Coding	PCB Version	1A	30V	30V	26AWG	0.14	PVC

Level and performance

q******e

The production of APTEK m8 bulkhead connector meets relevant requirements. It is fabricated with circuit protection, overload protection, and other emergencies protecting systems.

n******h

APTEK m8 waterproof connector materials have been tested to eliminate any chemicals that have a negative impact on health.

n******x

Many advanced technologies are used in the production of APTEK m8 waterproof connector. New technologies in fiber materials, textile dyeing and 3d composite weaving have significantly optimized the overall performance of products.

y******w

APTEK m8 waterproof connector has been evaluated in many aspects, including assessments on contaminants and harmful substances, material resistance to bacteria and fungi, and VOC&formaldehyde emission.

r******h

APTEK m8 waterproof connector production uses fewer potentially toxic chemicals, such as chlorine, formaldehyde and heavy metals.

l******q

No critical defects can be found on this product, namely hazardous or unsafe conditions or non-compliance with regulations include sharp points or edges, stray needles left in the garment, loose studs or missing suffocation warning labels.

Product Message

*Name

Phone

*E-mail

*Content

APTEK Top m8 waterproof connector suppliers for industry