Top m8 sensor connectors wires supply for engineering

Latest products

M12 Circular Connector to USB2.0 Connector Molded with Cable

M8 Circular Connector to USB2.0 Connector Molded with Cable

Ethernet Patch Cables, double ended RJ45 8P8C male plug with locking screw on one end

Ethernet Patch Cables, double ended RJ45 8P8C male plug

Product Information
Feedback

The series of M8 circular connector provides a wide range of metric M8 connectors for small sensors and actuators. The connector of 8mm metric size with thread locking mechanism, is one of the most commonly used connectors in factory automation, ideally suited for industrial control networks where small sendos are required.

APTEK wires m8 sensor connectors supply for engineering-1

APTEK wires m8 sensor connectors supply for engineering-2

General Information

Connector Serries	M8
Gender	Female
Locking type	Fix screw
Mounting type	Straight
Standard	IEC 61076-2-104
Ambient temperature	-25℃ ~ +80℃
Connector insert	PA
Connector contacts	Brass with gold plated
Coupling nut/screw	Brass with nickel plated
Insulation resistance	≥100 MΩ
Contact resistance	≤ 5 mΩ
EMI Shielding	Non-Shielded
IP rating	IP 67 in locked condition
Locking Design	Anti-Vibration

Electrical data & Mechanical data

Contacts	Coding	Wire termination	Rated current	Voltage		Wire gauge/size		Wire insulation	Cable ending & length
Contacts	Coding	Wire termination	Rated current	A/C	D/C	AWG	mm²	Wire insulation	Cable ending & length
03 pins	A-Coding	PCB Version	3A	60V	60V	24AWG	0.25	PVC	Customized cable ending and length
04 pins	A-Coding	PCB Version	3A	30V	30V	24AWG	0.25	PVC
05 pins	B-Coding	PCB Version	3A	30V	30V	24AWG	0.25	PVC
06 pins	A-Coding	PCB Version	1A	30V	30V	26AWG	0.14	PVC
08 pins	A-Coding	PCB Version	1A	30V	30V	26AWG	0.14	PVC

Level and performance

h******z

Materials Requirement Planning (MRP) is one of the main factors in APTEK m8 female connector production. Materials used in the product are required to be tested in terms of strength, mechanical properties, and durability. A smooth part is added on its PTH line to reduce the roughness of through hole

x******w

The design principles of APTEK m8 sensor connectors mainly include the following aspects: stiffness and rigidity of the separate constructional elements and their combined behavior under load as well as operational movements. It is offered with low dielectric loss

m******w

The materials for making APTEK m8 sensor connectors are carefully selected by the QC team. Its materials feature excellent mechanical characteristics and physical properties which are required in the heavy-duty machine operation. The product has dynamic and mechanical stability

a******l

APTEK m8 sensor connectors is an inter infiltration result of various technologies. It is developed by the R&D team who adopts the mechanical technique, detection and sensing technology, automatic control technology, and servo drive technology. Its solderable surface is protected from the oxidation

r******y

The design considerations of APTEK m8 female connector cover the following aspects: static and dynamic stiffness, operational speeds, gearboxes, manual, and automatic control. It can be printed with numbers, names, data codes, logos, or other specific information

e******y

Our qualified team effectively controls this high quality product by implementing the quality control system. Its solder mask can be offered with green, blue, white, black, yellow, and red colors

Product Message

*Name

Phone

*E-mail

*Content

APTEK wires m8 sensor connectors supply for engineering