The Power of Modern Industrial Wireless Technology

by:APTEK     2020-06-29
Wireless industrial control systems use radio waves to send commands to different industrial devices. It has also a receiver unit that is enable to receive all types of radio wave signals from any other device. These electromagnetic waves can be of varying frequencies. They are emitted through wireless industrial transmitters and can be picked up by radio receivers. As the development of industrial wireless technology, the modern radio remote controls are developed quite a lot. The modern radio remotes are not only used as garage door openers, or to fly a toy airplane. These modern radio remotes are used to control the gigantic machines. They are also used for providing interference free control. These radio remotes consist of two different sections - A handheld transmitter system and a wireless receiver system. Generally, when you press a button on the radio remote, a radio wave is sent to the receiver, and the receiver decodes the signal and obeys the command sent by the transmitter. They can send signal from a great distance also. Normally the modern remote control systems are made with the superior quality of transmitter that is powered by high frequency range. They can really work from a high distance also. The radio waves can also penetrate even the walls. As a result an increased numbers of modern applications are now being designed with the radio remotes. These radio remote systems are also used for providing interference free control, as mentioned earlier. The modern industrial remotes are incorporated with Frequency Hopping Spread Spectrum Technology that is capable to eliminate all types of electrical and radio interference. During a single interference related problem, the FHSS powered transmitter can shut down the whole system without allowing any further disturbance. This eliminates all types of interference related problems as well as increases the productivity of the system. They also reduce the maintenance cost of the valuable machines. Radio remote control systems are used greatly in industrial sectors such as tank truck refueling, industrial petroleum, bulk transport, aircraft refueling etc. This unit is generally designed to be a fixed installation which is operated from either 12/24 VDC or 230 Vac. The operator should not connect the remote control with more than one power supply under no circumstances. Before removing the cover the operator should ensure that the main input supply is isolated. Whenever, any maintenance is required, the operator should only contact to the competent person or qualified electrician only. During the low battery condition, the external LED will flash for 5 seconds. The batteries can be recharged with 12/24VDC truck charger. Normally the battery charger is supplied. A Range of basic wireless control programs installation merely requires connections to power supply and the output relay screw terminals. The output relays are activated by the button press on the transmitter encoder. Housed in a rugged IP68 weatherproof enclosure, the receiver has the capability to be taught up to 15 transmitter button pairings. These are memorized even when the power is removed. Every particular person switch on every of the transmitters could also be paired with any or the entire receiver relay outputs. The decoder is provided in an IP68 rated enclosure with Cable Gland and wall mounting lugs.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.