Best m8 sensor connectors pcb company for industry

Latest products

M12 Circular Connector to USB2.0 Connector Molded with Cable

M8 Circular Connector to USB2.0 Connector Molded with Cable

Ethernet Patch Cables, double ended RJ45 8P8C male plug with locking screw on one end

Ethernet Patch Cables, double ended RJ45 8P8C male plug

Product Information
Feedback

Company Advantages
1. APTEK m8 pcb connector is manufactured by adopting advanced technology and production equipment. Founded in 2009, APTEK is a professional manufacturer of industrial waterproof connectors
2. Zhongshan Aptek Electronics Technology Co.,Ltd has gained recognition from almost every of our customers. Efficient response to all instructions from customers is a mission of APTEK
3. The product is able to yield the best results in the shortest time. It can perform tasks at a high speed while maintaining its consistency. Easy Connection at Industrial Sites is the pursuit of APTEK

The series of M8 circular connector provides a wide range of metric M8 connectors for small sensors and actuators. The connector of 8mm metric size with thread locking mechanism, is one of the most commonly used connectors in factory automation, ideally suited for industrial control networks where small sendos are required.

APTEK pcb m8 sensor connectors company for industry-1

APTEK pcb m8 sensor connectors company for industry-2

General Information

Connector Serries	M8
Gender	Male
Locking type	Fix screw
Mounting type	Straight
Standard	IEC 61076-2-104
Ambient temperature	-25℃ ~ +80℃
Connector insert	PA
Connector contacts	Brass with gold plated
Coupling nut/screw	Brass with nickel plated
Insulation resistance	≥100 MΩ
Contact resistance	≤ 5 mΩ
EMI Shielding	Non-Shielded
IP rating	IP 67 in locked condition
Locking Design	Anti-Vibration

Electrical data & Mechanical data

Contacts	Coding	Wire termination	Rated current	Voltage		Wire gauge/size		Wire insulation	Cable ending & length
Contacts	Coding	Wire termination	Rated current	A/C	D/C	AWG	mm²	Wire insulation	Cable ending & length
03 pins	A-Coding	PCB Version	3A	60V	60V	24AWG	0.25	PVC	Customized cable ending and length
04 pins	A-Coding	PCB Version	3A	30V	30V	24AWG	0.25	PVC
05 pins	B-Coding	Solder Version	3A	30V	30V	24AWG	0.25	PVC
06 pins	A-Coding	Solder Version	1A	30V	30V	26AWG	0.14	PVC
08 pins	A-Coding	Solder Version	1A	30V	30V	26AWG	0.14	PVC

Level and performance

Company Features
1. The technology applied in the APTEK plant is supported by internationally renowned technicians.
2. Producing m8 sensor connectors from customer's point of view will make APTEK stronger. Inquire online!

s******n

The raw materials of APTEK m8 pcb connector is eco-friendly, which is sourced from reliable suppliers. It receives popularity among customers from Europe, America, Middle East, and so on

u******d

APTEK m8 sensor connectors is manufactured under standardized production conditions. The product is highly resistant to oxidation

i******q

APTEK m8 pcb connector effortlessly strikes the perfect balance between practicality and beauty. Through hardening treatment, it is sturdy enough

g******o

The production process of APTEK m8 pcb connector follows strictly the industry standards. Its accessories, imported from Japan, Germany, Japan, are reliable and high-precision.

b******m

APTEK m8 pcb connector is produced at a quick rate due to increased the efficiency of production. Adopting stainless steel as the key materials, it is not easy to crack

m******v

Zhongshan Aptek Electronics Technology Co.,Ltd From the perspective of the overall operation, analyze and control the cost of manpower, material resources, resources, etc. at a macro level, so as to improve the economic performance of m8 pcb connector.

Product Message

*Name

Phone

*E-mail

*Content

APTEK pcb m8 sensor connectors company for industry